edge-rotator

Skid Steer

1050R

Height to Hinge Pin (mm): 109.6"

Operating Capacity (kg): 1,350 lbs. (612)

Net Power (kW): 44.5 hp (33) @ 2800

Spec Sheet
background

Specifications

Dimensions
A. Overall Operating Height - Fully Raised (mm) 139.6" (3546)
B. Height to Hinge Pin - Fully Raised (mm) 108.1" (2746)
C. Overall Height to top of ROPS (mm) 70.3" (1786)
D. Ground Clearance to Chassis (mm) 6.0" (152)
E. Overall Length with 55" Bucket (mm) 114" (2896)
F. Overall Length Less Bucket (mm) 88.9" (2258)
G. Wheelbase (mm) 34.5" (876)
H. Dump Reach at Full Height (mm) 22.8" (579)
I. Rollback at Ground Level 29°
J. Dump Angle 42°
K. Overall Width - Less Bucket (mm) 48.4" (1229)
L. Bucket Width (mm) 55" (1404)
M. Clearance Circle - Rear (mm) 54.1" (1374)
N. Clearance Circle - Front w/o Bucket (mm) 44.1" (1120)
O. Clearance Circle - Front w/Bucket (mm) 69.4" (1763)
P. Seat to Ground Height (mm) 32.6" (828)
Q. Rollback at Full Height 99°
R. Dump Height (mm) 84.5" (2146)
S. Departure Angle 26°
Standard Tire Size 27x8.5x15 HD
Engine
Make Yanmar
Model 3TNV88C-KMS Tier IV
Gross Power (kW) @ 2800 rpm 34.7 hp (25.5)
Net Power (kW) @ 2800 rpm     33.1 hp (24.7)
Maximum Torque (Nm) @ 1820 rpm 80 ft.-lbs. (108)
Displacement (L) 100 cu. in. (1.6)
Hydraulics
Auxiliary Hydraulics - Standard (L/min) 14.5 gpm (55)
High-Flow Hydraulics - Optional (L/min) N/A
Reservoir Capacity (L) 8 gal. (30.3)
Electrical
Battery (CCA) 12-volt (950)
Starter (kW) 12-volt (3.0)
Alternator 40-amp
Capacities/Weight
Rated Operating Capacity (kg) 1,050 lbs. (476)
With optional counterweight (kg) 1,175 lbs. (533)
Fuel Tank (L) 10.4 gal. (39.4)
Travel Speed - Maximum (km/hr) 5.9 mph (9.5)
Operating Weight - Approximate (kg) 4,000 lbs. (1814)
R-Series_SpecDiagram