edge-rotator

Track Loader

1650RT

Height to Hinge Pin (mm): 119.6" (3038)

Operating Capacity (kg): 1,650 lbs. (748)

Net Power (kW): 68.4 hp (51) @ 2500

Spec Sheet
background

Specifications

Specifications
Overall Operating Height - Fully Raised (mm) 157.8" (4008)
Height to Hinge Pin - Fully Raised (mm) 119.8" (3038)
Reach - Fully Raised (mm) 25.3" (642)
Dump Angle - Fully Raised 39°
Dump Height - Fully Raised (mm) 91.7" (2329)
Maximum Rollback Angle - Fully Raised 98°
Overall Height at ROPS (mm) 77.5" (1969)
Overall Length with Bucket - Standard Counterweight (mm) 126.2" (3205)
Overall Length without Bucket - Standard Counterweight (mm) 94.2" (2393)
Specified Height (mm) 64.5" (1638)
Reach at Specified Height (mm) 53.9" (1369)
Dump Angle at Specified Height 70°
Maximum Rollback Angle at Ground 28°
Carry Position (mm) 7.8" (198)
Maximum Rollback Angle at Carry Position 28°
Digging Position - Below Ground (mm)  
Angle of Departure with Standard Counterweight 28°
Ground Clearance (mm) 7.25" (184)
Track Gauge (mm) 53.4" (1356)
Track Shoe Width (mm) 12.6" (320)
Crawler Base (mm) 49.8" (1265)
Overall Width - Less Bucket (mm) 66.0" (1676)
Bucket Width (mm) 66.0" (1676)
Clearance Radius - Front with Bucket (mm) 77.9" (1979)
Clearance Radius - Rear with Standard Counterweight (mm) 56.7" (1440)
Maximum Rollback at Specified Height 68.6°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
Capacity
Operating Capacity at 35% of Tipping Load (kg) 1,650 lbs. (748)
Operating Capacity at 50% of Tipping Load (kg) 2,357 lbs. (1069)
Tipping Load (kg) 4,715 lbs. (2139)
Operating Weight (kg) 8,020 lbs. (3638)
Engine
Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement (L) 201.4 cu.in (3.319 L)
Cylinders 4
Net Horsepower (kW) @ 2500 rpm 68.4 hp (51.0 kW)
Gross Power @ 2500 rpm 68.4 hp (51.0 kW)
Oil Pump Capacity (L) 11 qts (10.4)
Alternator Voltage/Amperage 14V/100A
Track Drives
Drawbar Pull / Tractive Effort (kN) 9,578 lbs. (4,345)
Track Type Rubber
Track Rollers 4
Roller Type Steel
Track Width (mm) 17.7″ (450)
Ground Pressure - Narrow / Wide (bar) 6.5 / 5.2 psi (.45 / .36)
Forces
Bucket Breakout - Tilt Cylinder (kg) 4,230 lbs. (1,919)
Bucket Breakout - Lift Cylinder (kg) 5,060 lbs. (2295)
Ground Speed - Single Speed (km/hr)5.3 mph (8.5) 6.5 mph (10.5)
Ground Speed - Two Speed (km/hr) 10.0 mph (16.1)
Volume
Fuel Tank (L) 16.5 gal. (62.5)
Hydraulic Reservoir Tank (L) 11.0 gal. (41.6)
Coolant Capacity (L) 3.8 gal. (14.4)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 18.9 gpm (71.4)
High-Flow Hydraulic Flow - Rated Speed (L/min) 28.5 gpm (119)
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed
CTL_SpecDiagram