edge-rotator

Vertical Track Loader

3200VT

Height to Hinge Pin (mm): 129.2"

Capacity at 35% (kg): 3,200 lbs. (1452)

Net Power (kW): 108 hp (80.8) @ 2500

Spec Sheet
background

Specifications

Specifications
Overall Operating Height - Fully Raised (mm) 169" (4293)
Height to Hinge Pin - Fully Raised (mm) 129.2" (3251)
Reach - Fully Raised (mm) 42.2" (1072)
Dump Angle - Fully Raised 39.3°
Dump Height - Fully Raised (mm) 99" (2515)
Maximum Rollback Angle - Fully Raised 89.3°
Overall Height at ROPS (mm) 82.9" (2106)
Overall Length with Bucket - Standard Counterweight (mm) 157" (3165)
Overall Length without Bucket - Standard Counterweight (mm) 124.6" (3165)
Specified Height (mm) 677.1" (1959)
Reach at Specified Height (mm) 32.3" (821)
Dump Angle at Specified Height 64.7°
Maximum Rollback Angle at Ground 30.3°
Carry Position (mm) 8" (204)
Maximum Rollback Angle at Carry Position 31.1°
Digging Position - Below Ground (mm) -0.2" (-5)
Angle of Departure with Standard Counterweight 27°
Ground Clearance (mm) 12.4" (315)
Track Gauge (mm) 51.6" (1311)
Track Shoe Width (mm) 17.7" (450)
Crawler Base (mm) 58.4" (1483)
Overall Width - Less Bucket (mm) 69.5" (1766)
Bucket Width (mm) 83.9" (2131)
Clearance Radius - Front with Bucket (mm) 97.2" (2469)
Clearance Radius - Rear with Standard Counterweight (mm) 72.2" (1834)
Maximum Rollback at Specified Height 64.5°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
Capacity
Operating Capacity at 35% of Tipping Load (kg) 3,200 lbs. (1452)
Operating Capacity at 50% of Tipping Load (kg) 4,571 lbs. (2074)
Tipping Load (kg) 9,143 lbs. (4148)
Operating Weight (kg) 11,610 lbs. (5267)
Engine
Make/Model Deutz/TD 3.6 Tier 4
Type 4-Stroke Turbo
Displacement (L) 221 cu.in. (3.6 L)
Cylinders 4
Net Horsepower (kW) @ 2500 rpm 108 hp (80.8 kW)
Peak Torque (Nm) @ 1600 rpm 297 ft.-lbs. (403 Nm)
Oil Pump Capacity (L) 9 qts. (10.4)
Alternator Voltage/Amperage 14V/95A
Track Drives
Drawbar Pull / Tractive Effort (kN) 12,770 lbs. (5792)
Track Type Rubber
Track Rollers 5
Roller Type Steel
Track Width (mm) 17.7" (450)
Ground Pressure (bar) 5.3 psi (.37 bar)
Forces
Bucket Breakout - Tilt Cylinder (kg) 9,901 lbs. (4492)
Bucket Breakout - Lift Cylinder (kg) 7,491 lbs. (3398)
Ground Speed - Single Speed (km/hr)5.3 mph (8.5) 5.3 mph (8.6)
Ground Speed - Two Speed (km/hr) 7.8 mph (12.6)
Volume
Fuel Tank (L) 32.5 gal. (123)
Hydraulic Reservoir Tank (L) 16.5 gal. (62.5)
Coolant Capacity (L) 5.1 gal. (19.3)
Hydraulics
Auxiliary Hydraulic Flow - Rated Speed (L/min) 27 gpm (102.2)
High-Flow Hydraulic Flow - Rated Speed (L/min) 37.4 gpm (141.6)
Transmission Pump Type Axial Piston
Motor Type Axial Piston with Planetary Gear
CTL_SpecDiagram