Quick Specs
- Digging Depth of 13'3" - short arm
- Digging Depth of 14'2" - long arm
- Net Power of 57 hp
- Weight of 16,193 lbs.
All Excavators
Product Lines
Key Features
- Maximum Digging Depth of 13'3"with the short arm and 14'2" with the long arm
- Maximum Dump Height of 14'9" with the short arm and 15'5" with the long arm
- Operating weight with a cab is 16,193 lbs.
- 57 hp Yanmar diesel engine
- Hydraulic system is powered by two variable-capacity pumps and one gear pump, allowing for simultaneous hydraulic function without loss of power or speed
- Zero-tail Swing maneuverability allows the superstructure to rotate entirely within the tracks without overhang
- Slew Speed of 8.7 rpm
- Dual travel speed of 1.9 mph to 3.1 mph
- Sloped undercarriage frame reduces the amount of materials that build-up, increasing safety and reducing clean-up
- Extra large operator station features ergonomic controls and an adjustable, high-back seat
- Service is made easy with a large, swing-open door providing access to the hydraulic drive bank and a smaller swing-open door provides access to the engine
- 7503ZT Load Chart
Steering/Hydraulics
- Joystick controls
- SAE/ISO Selector Valve allows operators to choose their control operating format
Low Ground Pressure
A rigid undercarriage and rubber tracks spread out the machine's weight over a larger area, reducing the amount of pressure exerted on the ground. Steel reinforcements in the Bridgestone tracks make difficult terrain easy to maneuver.
Auxiliary Hydraulics
Hydraulic flow up to 15.1 gpm allow for the operation of a wide variety of attachments. Flat-faced couplers make attaching, and detaching, hydraulic lines quick and easy.
Hydraulic Self Leveling
As the lift arm is raised on the loader, the hydraulic self-leveling feature keeps the attachment level. This reduces material spillage and operator fatigue, allowing your operators to be more efficient and productive.
| Engine | |
| Make | Yanmar |
| Model | 4TNV98-VNS |
| Type | 4-cyl. water-cooled diesel |
| Displacement (cc) | 202 cid (3318) |
| New Power (kW) | 57 hp (42.5) |
| Fuel Tank (L) | 24.6 gal. (93) |
| Fuel Consumption - 65% of Full Load (L/hr) | 2.2 gal./hr (8.5) |
| Hydraulic System | |
| Pumps | two variable-capacity, one gear |
| Flow Rate - gpm (L/min) | 2 @ 19.4 (73.3) + 16.6 (62.7) |
| Working Pressure (bar) | 3771 psi (260) |
| Swing System Pressure (bar) | 3118 psi (215) |
| Oil Cooler | standard |
| Hydraulic Tank (L) | 26.1 gal. (99) |
| Undercarriage and Slewing System | |
| Travel Speed - dual (km/hr) | 1.9 mph (3.2), 3.1 mph (5.0) |
| Gradability | 30° = 58% |
| Steel Track Width (mm) | 17.7" (450) |
| No. of Track Rollers (Bottom/Top) | 5/1 per side |
| Sprocket Center | 7'5" (2265) |
| Ground Clearance (mm) | 13.4" (340) |
| Ground Pressure - average (kPa) | 5.0 psi (0.35) |
| Slew Speed | 8.7 rpm |
| Maximum Drawbar Pull (kN) | 17,196 lbs (76.5) |
| General Specifications | |
| Operating Weight (kg) | |
| w/cab | 16,193 lbs. (7345) |
| Dimensions (mm) | |
| Height | 8'9" (2665) |
| Width | 7'7" (2300) |
| Length | 21'3" (6480) |
| Maximum Digging Depth (mm) | 13'3" (4030) |
| w/long arm | 14'2" (4320) |
| Maximum Digging Height (mm) | 21'9" (6630) |
| w/long arm | 22'5" (6820) |
| Max. Vertical Wall Dig Depth (mm) | 11'2 (3400) |
| w/long arm | 12'2" (3700) |
| Maximum Dump Height (mm) | 14'9" (4500) |
| w/long arm | 15'5" (4690) |
| Maximum Digging Radius (mm) | 23'2" (7070) |
| w/long arm | 24'1" (7350) |
| Bucket Dig Force (kN) | 10,184 lbf (45.3) |
| Arm Force (kN) | 7936 lbf (35.3) |
| Minimum Tail Swing Radius (mm) | 3'9" (1150) |
| Minimum Front Swing Radius (mm) | 7'6" (2277) |
| Swing Angle - left/right | 67° / 63° |
| Minimum Tail Overhang over Tracks (mm) | 0" (0) |
| Dozer Blade | |
| Dimensions - width / height (mm) | 7'7" / 1'8" (2300/500) |
| Maximum Lift - above / below (mm) | 18" / 15.9" (465/405) |
| Sound Levels | |
| Power / Pressure Level | 97 dB(A) / 77 dB(A) |